MOTORS LOW CENTER ASYNCHRONOUS – 3 PHASE – 4 POLES
● For industrial cutting machines (marble, stone…)
● Direct-drive coupling to the blade (blade holding disks)
● Deep cut, no need of pulley
● Extremely compact
● IP55 | MR107 IP65 against water and dust (O-ring, V-ring and gaskets between shields and housing)
● Special executions on request
| model | FRAME SIZE MM | KW (S6 60%) 400V 50 HZ | Brake available |
|---|---|---|---|
| MR71 T1SA/4 | 71 | 1,85 | yes |
| MR71 T1SB/4 | 71 | 2,4 | yes |
| MR80 T1SA/4 | 80 | 3 | yes |
| MR80 T1SB/4 | 80 | 4 | yes |
| MR80 T1MA/4 | 80 | 5 | yes |
| MR93 T1MA/4 | 93 | 6 | yes |
| MR93 T1LA/4 | 93 | 8 | yes |
| MR107 T1MA/4 | 107 | 8,4 | yes |
| MR107 T1MB/4 | 107 | 9,6 | yes |
| MR107 T1MC/4 | 107 | 10,8 | yes |
| MR107 T1MD/4 | 107 | 12 | yes |
Standard clockwise rotation
S6 60%: on an ideal 10-minute cycle, the motor is in operation at full load (rated output) for 6 minutes and with no load for 4 minutes
Headquarter
Soga S.p.A.
Via della Tecnica 15
Montecchio Maggiore – VI – Italy
VAT IT 00001640242
T. +39 (0)444 747700
contact us
NEWS
SOGA® BECOMES ITALIAN HISTORICAL TRADEMARK3 September 2025 -
SINCRO, THE NEW SK 355 ALTERNATORS3 July 2025 -
ROTATING ELECTRICAL MACHINES, IT’S A PASSION!12 June 2025 -